Additives for Volvo S40/V40 (644/645) 08.1996 - 08.2000

Eliminates varnish and sludge. Reduces corrosion. Prevents stalling and frozen fuel lines. Retards wax formation. Contains anti-gel properties.

Improves mileage by helping to maintain a clean combustion chamber. Lubricates upper cylinder.

All season diesel lubricant (low sulphur formula) provides superior lubricity and anti-wear protection for diesel engines. Cleans and lubricates the entire fuel system while decreasing engine smoke and increasing power

Prevents fuel system corrosion, lubricates and protects injectors and pumps. Stabilizes fuel during storage. Formulated to reduce gum and deposits on diesel fuel injectors. Suitable for all types of diesel engines.

The advanced chemistry of TKO Diesel provides dramatic results in passenger and light duty applications. Injector clean-up, restored power, reduced emissions and improved fuel economy are achieved in just one treatment.

TKO 2000 is an extremely concentrated formula that provides rapid clean-up of fuel injector, intake valve and combustion chamber deposits. TKO 2000 restores, protects and maximizes engine performance in gasoline powered vehicles

READ MORE
Oil additive to maintain performance characteristics and reduced wear of any type of engine after its complete treatment with other compounds of Active series. It is recommended to be added to motor oil after each (or at least each second) oil change.
It restores protective layer on friction surfaces on the go and thus: significantly reduces wear speed, prolongs engine lifetime, maintain compression, highly efficient fuel burning and therefore power, acceleration and low fuel consumption.
Active Regular designed to maintain protective layer, but isn’t able to restore a worn engine from the scratch. It is suitable for all engine types and designs, including turbocharged ones. It doesn’t change oil properties and acts only on metallic surfaces.

READ MORE Additive (compound) MOTOTEC 2 - additive from ATOMIUM is designed to restore and protect two-stroke engines of motorcycles, mopeds, ATVs, tow trucks, snowmobiles, snow plows and other motor vehicles from wear.

READ MORE

Additive (compound) MOTOTEC 4 - additive from ATOMIUM is designed to restore and protect four-stroke engines of motorcycles, mopeds, ATVs, tow trucks, snowmobiles, snow plows and other motor vehicles from wear.

READ MORE Additive for restoring the working surfaces of gears, reducing the noise and vibrations during their operation. Designed for such units as: differential (including self-locking), transfer case, HALDEX clutch, high-friction differential, on-Board gearbox. It is suitable for use in units with any type of transmission fluid, since it does not change the chemical and physical properties of the lubricant and only affects the metal friction surfaces.

READ MORE Additive Atomium HPS - creates conditions under which a metal protective layer is formed on the friction surfaces. This layer partially restores worn parts of the power steering pump, optimizes gaps, allows you to keep a denser oil layer on their surface, and cleans the spool mechanism.

READ MORE Manual gearbox oil additive to restore operative parameters, reduce noise and vibrations, facilitate gear shifting, reduce energy loss and thus save fuel consumption. Suitable for all types of manual gearboxes including semi-automatic ones as they use the same type of torque transmission mechanism.
MGSB compound is compatible with all brands of transmission oil. It is chemically neutral and doesn’t change oil properties.

READ MORE Diesel fuel additive to restore nominal characteristics of high pressure fuel pump and first of all its outlet pressure and its change rate. HPFP compound restores worn pump plunger and bring back its operative parameters. It decreases fuel consumption, increases power and acceleration, prolongs pump service time.
HPFP compound is compatible with all brands of diesel fuel. It is chemically neutral and doesn’t change fuel properties.

READ MORE Engine oil additive for restoring engine performance characteristics: compression, power, acceleration, effective fuel consumption, as well as for extending the wear life and protection in emergency situations. It will get rid of oil extra usage and engine smoke. The compound is designed for the treatment of gasoline and gas engines (LPG, CNG) of passenger cars with a mileage less than 50,000 kilometres. Suitable for all engine types and designs, including turbocharged and non-turbocharged.
Tribotechnical compound alters friction process of metallic surfaces. It does not react with motor oils and their packages of chemical additives, does not change their properties and characteristics.

READ MORE Engine oil additive for restoring engine performance characteristics: compression, power, acceleration, effective fuel consumption, as well as for extending the wear life and protection in emergency situations. It will get rid of oil extra usage and engine smoke. The compound is designed for the treatment of gasoline and gas engines (LPG, CNG) of passenger cars with a mileage less than 50,000 kilometres. Suitable for all engine types and designs, including turbocharged and non-turbocharged.
Tribotechnical compound alters friction process of metallic surfaces. It does not react with motor oils and their packages of chemical additives, does not change their properties and characteristics.

READ MORE Tribotechnical compound is an engine oil additive aimed to restore engine performance parameters: compression, power, acceleration, effective fuel consumption, as well as to extend the engine life span and prevent breakdowns in emergency situations. Compound is designed as diesel engine treatment to be used for passenger cars with a mileage less than 50,000 kilometres and more. Suitable for all engine types and designs, including turbocharged and non-turbocharged ones.
Tribotechnical compound alters friction process of metallic surfaces. It does not react with motor oils and their packages of chemical additives, does not change their properties and characteristics.

READ MORE Automatic transmission oil additive to remove jerks and shakes during shifting in automatic transmissions, reduce noise and vibrations, protect gears and bearings against wear.
It also helps to restore belt tension in CVT (continuously variable transmissions), eliminate chain slips, extend service life of cones. Suitable for any brand of gearbox and for any type of transmission fluid.
Atomium AGSB is chemically neutral and doesn’t change properties of transmission oil.

READ MORE Engine Flush is an internal engine cleaner. Suitable for both gasoline and diesel engine cleaning. Instructions for use: Check that the oil level in the engine is normal. Open the cap and pour the contents of the bottle into the engine through the oil cap. Let the engine idle for 10-20 minutes. Driving with Engine Flush in use is prohibited! Drain the warm engine of used oil. Replace the oil filter and pour in new oil. For best results, use Engine Flush with every oil change. Contains petroleum compounds.

READ MORE Renergi is the manufacturer of MERGI Combustion Catalyst. MERGI promotes combustion by reducing the ignition delay in the combustion process. Improving this indicator brings various beneficial effects, such as reducing maintenance costs, fuel savings, and emission reduction.


Renergi AS is a Norwegian company that has been conducting fuel combustion research since the 1970s. As a result, the MERGI combustion catalyst has been developed. This catalyst improves the quality of fuels, releasing more energy, reducing hydrocarbon residues, and producing cleaner residues. It is a non-metallic catalyst.

The MERGI Combustion Catalyst reduces fuel ignition delay, increasing combustion efficiency. This, in turn, reduces maintenance costs (piston rings break less frequently and are less likely to seize, reducing wear on rings and cylinder liners, turbochargers, and catalysts, etc.), as well as lowering fuel consumption. It also allows for the use of lower-quality fuels and reduces the emission of CO, NOx, and HC. MERGI improves the combustion of fuels such as heavy fuel oil, marine diesel, gas oil, gasoline, and automotive diesel. It can be used in both marine and land-based engines, as well as in boilers.

Field and laboratory tests have been conducted at the following institutions: Det norske Veritas, Fueltech, Wroclaw University of Technology, Marintek, Delft University of Technology, New Sulzer Diesel. Renergi also has test data from delivery companies. As for quality control, the Swedish National Testing and Research Institute continuously tests the MERGI Combustion Catalyst.

FACTS:

1. Reduces fuel ignition delay by 8.8% for heavy fuels and 10% for light fuels

2. Reduces exhaust gas temperature by 15°C - 40°C

3. Reduces fuel consumption by up to 10%

4. Reduces CO, HC, and Nox emissions by up to 53%, 40%, and 11%, respectively

MERGI Combustion Catalyst

READ MORE Stop Smoke engine oil additive prevents engine oil from entering the cylinder combustion chamber, where the fuel mixture burns together with the engine oil causing engine smoking. In most cases, engine oil enters the cylinder due to worn engine parts, such as piston rings and tired seals. Stop Smoke reduces oil consumption and seals worn engine. Instructions for use: Pour the contents of the bottle into the engine through the oil cap. 300ml of the substance is intended for use with 5 liters of engine oil. Suitable for use with diesel and gasoline engines, as well as mineral and synthetic oils. Do not use together with other oil additives.

READ MORE Carlube Oil Treatment oil additive protects and extends the life of gasoline and diesel engines. Suitable for use in turbocharged engines. Increases engine compression, reduces oil consumption, and harmful emissions in exhaust gases.
Suitable for use with both mineral and synthetic oils. Safe for the catalytic converter.

READ MORE Protects the fuel system from corrosion and freezing,
by binding water present in it, dissolving and cleaning
the impurities in the fuel and preventing wax formation.
Facilitates engine starting and reduces smoking.
Add directly to the fuel tank or storage tank.


Recommended mixing ratio depending on the outside temperature:
-20°C 150ml for 150l of fuel
-25°C 150ml for 75l of fuel
-40°C 150ml for 40l of fuel

READ MORE The gasoline additive Petrol Treatment is designed to increase the efficiency of gasoline engines. Suitable for use with both carburetor and fuel-injected engines. Reduces the content of harmful substances in exhaust gases. Increases engine efficiency.

READ MORE Carlube lead substitute is a fuel additive for old gasoline engines that need to use leaded gasoline. Helps combat engine wear and loss of power.

READ MORE

READ MORE Renergi is the manufacturer of the MERGI Combustion Catalyst. MERGI promotes combustion by reducing the ignition delay in the combustion process. Improving this indicator brings various beneficial effects, such as reducing maintenance costs, fuel savings, and emission reduction.


Renergi AS is a Norwegian company that has been conducting fuel combustion research since the 1970s. As a result, the MERGI combustion catalyst has been developed. This catalyst improves the quality of fuels, releasing more energy, reducing hydrocarbon residues, and producing cleaner residues. It is a non-metallic catalyst.

The MERGI Combustion Catalyst reduces the fuel ignition delay, increasing combustion efficiency. This, in turn, first reduces maintenance costs (piston rings break less frequently and are less likely to seize, reducing wear on rings and cylinder liners, turbochargers, and catalysts, etc.), as well as lowering fuel consumption. It also allows for the use of lower-quality fuels and reduces the emission of CO, NOx, and HC. MERGI improves the combustion of heavy fuels, marine diesel, gas oil, gasoline, automotive diesel fuel. It can be used in both marine and land-based engines, as well as in boilers.

Field and laboratory tests have been conducted at the following institutions: Det norske Veritas, Fueltech, Wroclaw University of Technology, Marintek, Delft University of Technology, New Sulzer Diesel. Renergi also has test data from delivery companies. As for quality control, the Swedish National Testing and Research Institute continuously tests the MERGI Combustion Catalyst.

FACTS:

1. Reduces fuel ignition delay by 8.8% for heavy fuels and 10% for light fuels

2. Reduces exhaust gas temperature by 15°C - 40°C

3. Reduces fuel consumption by up to 10%

4. Reduces CO, HC, and NOx emissions by up to 53%, 40%, and 11%, respectively

Using MERGI Combustion Catalyst

READ MORE Contains a highly effective package of additives to stop engine oil leaks. Restores the softness and elasticity of engine gaskets.

READ MORE Increases the cetane number of diesel fuel by 6 units. Facilitates cold starting of the car, reduces engine noise, and smoothes idle. Reduces emissions by up to 50%, fuel consumption by 5-7%. Effectively cleans fuel injectors, combustion chamber valves, and piston rings. Additionally lubricates the engine fuel system and extends its operation.

READ MORE Diesel engine fuel system cleaner and tuning. Octane booster (up to 6 units). Reduces noise, detonation, fuel consumption by 5-7% and exhaust gas toxicity by 25-50%. Cleans injectors and combustion chamber. Facilitates cold start and smooths idle.

READ MORE Exhaust gas recirculation (EGR) system cleaner. For dissolving residues on the EGR valve, air intake system, manifold, and intake valves. To restore airflow to the engine, improve performance and acceleration, and reduce exhaust emissions.

READ MORE For use in manual gearboxes and differentials. The MoS2 additive creates a strong, long-lasting lubricating film on all rubbing and sliding metal surfaces. Reduces wear, gearbox wear, and the formation of excessive temperatures in the gearbox. The result is smoother driving, smoother gear changes, and minimal wear on gears and friction surfaces. The contents of the package are sufficient for up to 1 liter of gearbox oil. Not suitable for use in wet clutch motorcycles.

READ MORE High-quality fuel additive for all gasoline engines. Protects and cleans all fuel system components that come into contact with fuel such as pipelines, injectors, cylinders, combustion chambers, and spark plugs.


Special corrosion inhibitors prevent corrosion formation in the fuel system. Helps prevent an increase in fuel consumption. Extends the life and effective operation of exhaust after-treatment systems.


Instructions for use:


Suitable for use in all gasoline engines, whether with or without a catalytic converter. Especially recommended for direct injection gasoline engines.


Use at every car maintenance:



• To prevent an increase in fuel consumption.

• To prevent a decrease in engine performance.

• If you suspect poor quality fuel has entered the tank.

• If you use E10 gasoline. E10 - gasoline with a 10% biofuel content.


Instructions for use:


Add the contents of the bottle to the tank up to 60 liters of fuel. The minimum amount of fuel in the tank should be at least the reserve amount. Typically around 10 liters.


TÜV tested, safe to use even in the most modern engines.

READ MORE Allows cleaning of injector nozzles without disassembling the injection system. Removes contaminants generated during operation from the entire injection system.

READ MORE Allows cleaning of injector nozzles without dismantling the injection system. Thoroughly removes coke and soot residues. Ensures continuous lubrication of the high-pressure pump, even with low-sulfur diesel fuel. For use in all diesel engines, including those using Common Rail direct injection technology or unit injectors.

READ MORE

READ MORE

READ MORE Using an additive keeps gasoline in a hybrid car's fuel tank ready for long-term use and keeps the fuel injectors clean


Beneficial properties of Liqui Moly fuel additives see here

READ MORE Special additive package to improve engine oil performance. Extends optimal performance of engine oil for long maintenance intervals.



• Stabilizes engine oil performance.

• Provides additional protection against oxidation.

• Reduces oil consumption.

• Suitable for all types of engine oils.

• Easy to use. No special tools required.


Applications:
Suitable for all gasoline and diesel engines. Increases oil viscosity index, ensuring more stable oil viscosity at higher temperatures and thus a stronger oil film on lubricated surfaces.

Instructions for use:
Add a bottle of Valvoline Engine Oil treatment to the engine oil and continue using the car. Important! Do not exceed the maximum oil level allowed in the crankcase. Suitable for 4.5 liters of engine oil. Safe to use up to 20% of the engine oil volume.

READ MORE Highly effective flow improver for diesel fuel and heating oil.


Prevents diesel fuel from gelling at low temperatures and improves the combustion process. An ideal solution and preventive measure for cold starts at low temperatures. Keeps diesel engines in perfect working condition when driving in cold weather conditions.

Helps avoid the transition from summer fuel to winter diesel and the cold start problems typical for that time due to sudden weather changes.



• Keeps diesel fuel flowing at low temperatures.

• Prevents diesel fuel thickening and helps prevent clogging of the fuel filter and fuel lines.

• Raises the fuel cetane number for optimal fuel combustion.

• Easy to use. No special equipment required.


Usage:

Suitable for all diesel engines; both stationary and vehicles. Also suitable for use in fuel tanks. Helps avoid cold start and cold operation problems at low temperatures.

Instructions for use:

Pour the contents of the bottle into the fuel tank before the fuel temperature drops below 0 °C.

Dosage:

Improves cold protection up to*:

1 : 1000 - 3 °C (bottle for 300 liters of fuel)

1 : 500 - 6 °C (bottle for 150 liters of fuel)

1 : 200 -12 °C (bottle for 60 liters of fuel)

* actual protection depends on the quality of the diesel fuel

Note! Pour the contents of the bottle into the fuel tank before refueling to ensure the best possible mixing with the fuel during refueling. Suitable for both summer and winter diesel fuel.

READ MORE Diesel particulate filter cleaner. Agent for removing carbon and ash residues from diesel particulate filter systems (no need for disassembling equipment).

READ MORE Reduces friction and creates a lubricating layer on engine parts. Reduces fuel consumption and ensures smoother operation. Suitable for use with all types of engine oils.

READ MORE Contains a package of highly effective additives to ensure better pressure resistance and increase engine oil wear protection.

READ MORE

READ MORE

READ MORE Removes residues from the diesel injection system and combustion chamber and prevents their reformation. Maintenance for all diesel injection system components. Prevents nozzle needles from sticking and seizing. Increases cetane number and improves diesel fuel ignition. Ensures smooth engine operation. Protects the entire fuel system from corrosion and wear. Restores emission compliance and engine performance. Clean engines consume less fuel and are less polluting.


Beneficial properties of Liqui Moly fuel additives view here

READ MORE Special agent for reducing soot and ash content / technical carbon / in diesel engine systems. Prevents the formation of thick exhaust gas smoke, over 50% less soot and ash. Regular use optimizes exhaust gas content. The agent is environmentally friendly, harmless to both drivers and pedestrians. It cleans the engine, keeps injectors clean, and acts preventively on diesel injectors. Pour the contents of the bottle into the tank before refueling. 150 ml of the agent is sufficient for 50 liters of diesel fuel. Self-mixing.


Useful properties of Liqui Moly fuel additives see here

READ MORE An ultra-efficient additive used in diesel generators to reduce soot and exhaust emissions and increase engine power. Suitable for all types of diesel engines and various types of diesel fuels.

READ MORE Concentrated oil additive designed to reduce oil burning in engines that consume oil. The high viscosity additive reduces wear on worn piston rings, bearings, etc., thereby increasing compression and reducing engine noise. The additive provides extra protection for worn engines and extends the life of the catalytic converter. Directions for use: Add to warm engine oil at each oil change or between changes if oil consumption is really high. 300ml is sufficient for treating 4 to 6L of oil. NB! Do not add more than 10% of the oil capacity.

READ MORE For adding to gasoline for both 2T and 4T motorcycles and car engines. Cleans the engine fuel system and protects it from corrosion. Compensates for the power loss caused by adding bio-ethanol to E5 and E10 fuels, thereby improving the engine's acceleration characteristics.

READ MORE See the useful properties of Liqui Moly fuel additives here

READ MORE Special fuel additive for Common Rail systems. Removes and helps prevent deposits, corrosion, moisture, and improves fuel quality. Maintains injectors and the entire fuel system. The effect lasts optimally for 2000km


Beneficial properties of Liqui Moly fuel additives see here

READ MORE Suitable for all gasoline engines. Removes all contaminants generated during operation from the fuel system, taking them to the combustion chamber. Dissolves resin and rubber residues in the carburetor and fuel injection system. Removes carbon deposits and unburned hydrocarbons from the upper area of the cylinder. Binds moisture and condensation throughout the fuel system. Lubricates and protects the upper part of the cylinder.

READ MORE For use in all diesel engines, especially those using Common Rail (direct injection abbreviation) technology or unit injectors. The fuel additive is particularly necessary for extended maintenance intervals. Removes all pollutants generated during fuel system operation, taking them to the combustion chamber. Absorbs moisture and removes it from the fuel system, ensuring effective protection of the fuel pump. Ensures optimal fuel injection and permanent lubrication and protection of all fuel system components. Suitable for vehicles equipped with a DPF filter.

READ MORE Restores oil viscosity and washing properties, reduces friction and wear of parts. Stops oxidation and engine wear under heavy loads and evens out pressure differences in the combustion chamber and crankcase. Contains a metal conditioner SMT², which helps to save engine resources. Reduces valve and engine noise, oil "burnout," and engine smoking. Evens out the oil film on friction surfaces. Increases engine compression and releases stuck piston rings. Helps increase the remaining engine life by 2.5-3 times. Extends the life of the turbocharger. Facilitates car starting and improves dynamics.

READ MORE Removes deposits from the diesel injection system and combustion chamber and prevents their re-formation. Maintenance for all components of the diesel injection system. Prevents sticking and sticking of spray needles. Increases the cetane number and improves the flammability of diesel fuel. Ensures quiet engine operation. Protects the power system as a whole from corrosion and wear. Restores emission compliance and full engine performance. Clean engines use less fuel and are less polluting. See the useful properties of Liqui Moly fuel additives here

READ MORE Cleans all types of nozzles and restores their original properties after one use. Eliminates micro defects of metal from contact surfaces. Has a restorative effect on the high-pressure pump. Completely eliminates clogging of nozzles. Protects the high-pressure pump from poor fuel, lack of lubrication. Reduces engine smoking due to fuel. Reduces noise from the engine's high-pressure pump. Improves the specific operation of a diesel engine. Prevents rusting and oxidation of the fuel system.

One jar is intended for 50-60L of fuel. It is recommended to use every 3000km or more frequently depending on the quality of the fuel.

READ MORE Reduces the noise of hydraulic lifters caused by wear. Creates a special layer on the lifter surface.

READ MORE See the useful properties of Liqui Moly fuel additives here

READ MORE

READ MORE

READ MORE See the useful properties of Liqui Moly fuel additives here

READ MORE Prevents fuel aging and oxidation. Prevents corrosion throughout the fuel system. Preparation for problem-free long-term storage of lawnmowers, chainsaws, motorcycles, ATVs, hobby cars, scooters, vintage cars, and other gasoline-powered 2 and 4-stroke engines. Adds reliability. Long-lasting effect.


Beneficial properties of Liqui Moly fuel additives view here

READ MORE Concentrated cleaning gasoline additive for quick and immediate fuel system cleaning. By cleaning the entire fuel system, it restores the engine's optimal performance. Instantly reduces deposits, lowers harmful emissions, and solves the higher fuel consumption problem caused by a decrease in engine power.

Instructions for use:
Suitable for use in all gasoline engines, both with and without a catalytic converter.

Use when:



• Fuel consumption has increased.

• Engine power has decreased.

• Emission levels have increased or indicator lights indicate this.


Instructions for use:


Pour the contents of the bottle into the fuel tank for up to 80 liters of fuel.

READ MORE See the useful properties of Liqui Moly fuel additives here

READ MORE Removes residues deposited on injectors and in the combustion chamber. Increases cetane number. Eliminates deficiencies in engine operation (e.g. knocking at idle) and ensures smooth and quiet engine operation. Protects the entire fuel system from corrosion. Optimizes exhaust gas test values. Also suitable for preventive use. Clean engines consume less fuel and are less polluting.


Beneficial properties of Liqui Moly fuel additives view here

READ MORE Restores the true viscosity and washing properties, reduces friction and wear of parts. Stops oxidation and engine wear under heavy loads and evens out pressures in the combustion chamber and crankcase. Contains the metal conditioner SMT², which helps save engine resources. Reduces valve and engine noise, oil "boiling," and engine smoking. Evens out the oil film at friction surfaces. Increases engine compression and frees stuck piston rings. Helps increase engine life by 2.5-3 times. Extends the life of the turbo compressor. Facilitates starting the car and improves dynamics.

READ MORE See the useful properties of Liqui Moly fuel additives here

READ MORE Removes deposits accumulating in injectors, valves, spark plugs, and combustion chambers and prevents their formation. Facilitates starting and ensures smooth engine operation. Maintenance for all gasoline injection system components. Protects the entire fuel system from corrosion. Adds brightness and increases compression. Restores exhaust compliance and engine performance.


Beneficial properties of Liqui Moly fuel additives see here

READ MORE See the useful properties of Liqui Moly fuel additives here

READ MORE See the useful properties of Liqui Moly fuel additives here

READ MORE Removes deposits from the diesel injection system and combustion chamber and prevents their re-formation. Maintenance for all components of the diesel injection system. Prevents sticking and sticking of spray needles. Increases the cetane number and improves the flammability of diesel fuel. Ensures quiet engine operation. Protects the power system as a whole from corrosion and wear. Restores emission compliance and full engine performance. Clean engines use less fuel and are less polluting. See the useful properties of Liqui Moly fuel additives here

READ MORE The product refreshes gaskets and seals, softens and expands rubber parts. Eliminates minor oil leaks from the engine. Reduces engine noise and decreases oil loss through piston rings and valves.

READ MORE Reduces friction and creates a lubricating layer on engine parts. Reduces fuel consumption and ensures smoother operation. Suitable for use with all types of engine oils.

READ MORE 2nd generation synthetic metal conditioner SMT². Wear-resistant substance for metal surfaces. Prevents excessive wear and associated heating under heavy loads. Increases engine power, facilitates cold engine start, extends oil change interval by 30%, doubles engine lifespan, reduces maintenance frequency, decreases engine detonation, prevents engine overheating, reduces fuel consumption by 10%, lowers exhaust toxicity, diminishes oil consumption and ecological damage caused by the engine, reduces the risk of engine seizure when the oil has completely drained from the engine.

READ MORE

READ MORE Keeps the fuel in the gasoline tank of vehicles equipped with a gas system fresh. Protects gasoline from oxidation and aging in gas-equipped cars where gasoline is only used for starting the vehicle. The additive has a long-lasting effect.


Useful properties of Liqui Moly fuel additives see here

READ MORE Reduces the friction coefficient of the engine up to 5 times. Increases the power of the torque. Guarantees cold start of the car. Eliminates noise and vibration. Restores engine power. Reduces fuel consumption by up to 10%. Stabilizes idling. Increases the working life of mechanisms. Reduces the possibility of the engine stalling if the oil has completely drained out of the engine.

The additives contained provide optimum care for rubber and plastic seals in the steering gear. Prevents oil loss, stops oil loss in steering gears that drip and regenerates hardened seals. Holes and ducts of the steering gear are cleaned and the performance of the oil is thus revitalized. The noise levels are reduced, the service life is extended and the repair costs are lowered.

Suitable for steering gears that are filled with ATF II, ATF III or central hydraulic system oils. Add to the compensating reservoir of the steering system. 35 ml is sufficient for 1 liter of oil.

READ MORE Best solution for cleaning the engine internally. High-efficiency substance that removes all kinds of dirt from the engine. The engine achieves better efficiency after use, exhaust gas indicators improve. Optimal to pour into the warm engine oil and let it idle for 10 minutes before an oil change.

READ MORE See the useful properties of Liqui Moly fuel additives here

READ MORE Increases the flowability of diesel fuel and improves flow properties in the filter. For use at temperatures up to -31 °C (depending on the quality of the diesel fuel). Ensures the reliability of all diesel engines when operating at low temperatures.


Suitable for all diesel engines regardless of the presence of a particle filter - especially suitable for preventive use. Tested with positive results also on turbochargers. Optimal effect when added to the fuel tank before fuel gelling (at a temperature of approximately 0 °C). Ideally compatible with all commonly used diesel and biodiesels, as well as heating oil. 1 liter is sufficient for 1000 liters of fuel (dosage ratio 1:1000). Note: Protect from freezing; store at temperatures above 0 °C!

READ MORE Removes residues from the diesel injection system and combustion chamber and prevents their re-formation. Prevents the nozzles from jamming and sticking. Ensures smooth engine operation. Protects the entire fuel system from corrosion and wear. Restores the engine's optimal performance. Clean engines consume less fuel and are less polluting.


Beneficial properties of Liqui Moly fuel additives see here

READ MORE

READ MORE Reduces the friction coefficient of the engine up to 5 times. Increases the power of the torque. Guarantees cold start of the car. Eliminates noise and vibration. Restores engine power. Reduces fuel consumption by up to 10%. Stabilizes idling. Increases the working life of mechanisms. Reduces the possibility of the engine stalling if the oil has completely drained out of the engine.

READ MORE

READ MORE Ceratec is the latest high-tech oil additive in the lineup. Suitable for use with all types of engine oils. Reduces friction and wear. Prevents direct metal-to-metal contact. Reduces fuel consumption and ensures smoother engine operation. Extends engine life.

Effective for up to 50,000km

READ MORE Diesel fuel additive:



• reduces fuel consumption

• reduces particulate matter in exhaust gases

• cleans and protects fuel system components

• improves lubricity, reducing wear on fuel systems

• prevents condensation

• lowers the freezing point by up to 22°C

• developed by fuel system manufacturers

• suitable for use in all diesel engines

• improves cetane index, thus enhancing ignition and reducing engine noise level

• prevents corrosion and rust formation in fuel systems

• does not contain alcohol

READ MORE AdBlue® - 32% urea solution for use in cars
Almost all trucks and heavy equipment have been selected using Selective Catalyic Reduction (SCR) technology to meet the required emission levels (Euro-4, Euro-5, Euro-6).

SCR technologies are based on the addition of AdBlue to the discharge process, causing a chemical reaction that results in harmful substances (NOx) becoming non-harmful - nitrogen and water. The name AdBlue® is a registered trademark of the German Association of Vehicle Manufacturers (Verband der Automobilindustrie / VDA) - scientifically known as AUS-32 test solution. The AdBlue name can only be used if the product meets the requirements of ISO 22241-1 and is VDA approved.

We deliver AdBlue liquid in both 10l and 20l canisters, as well as in larger 210l containers or 1000l IBCs. In addition, we can assemble stationary tank stations in the amount of 5,000, 10,000 and 15,000 lire by separate agreement. AdBlue is already available at petrol stations, which is why it is as easy to buy as regular fuel.

AdBlue quality
There are more and more non-specialized companies in Estonia that try to produce a similar urea solution themselves, which, however, may not meet the quality requirements. By using low-quality products, the car's catalyst can overlap with a layer of lime, which can cost you more than a thousand euros to restore. Using the wrong urea solution is analogous to using dilute AdBlue or even water. However, when driving with an empty AdBlue tank, the catalyst will inevitably become clogged with soot.

Premium Kaubandus OÜ is an AdBlue certified reseller, complying with the ISO 22241-1 standard, and distributes AdBlue, which is certified by VDA. The quality of the product has been checked both in AB Achema's laboratory and in an independent laboratory and has a quality passport. The product is poured into a cleaned canister, which is then sealed. The above measures ensure the highest possible quality of the product.

AdBlue cost
The average cost of AdBlue is 1.5 liters per 100km. Euro-5 compliant cars account for 6% and Euro-6 compliant cars for around 7-8% of total fuel consumption. There are also external factors that affect the consumption of AdBlue: these are the heating quality, the engine performance. At present, all registered lorries have a special diagnostic tool (OBD) that can be used to check the toxicity of exhaust gases. These systems warn drivers that the fuel tank has run out of AdBlue. If the driver continues to drive without the addition of AdBlued, the diagnostic system activates the engine torque limiter, which allows the engine to reach only 60% of maximum torque, and also saves the data without running AdBlued.

Savings when using AdBlue
The use of AdBlue optimizes engine performance, reduces emissions and reduces fuel consumption. The reduction in heating costs amounts to 5% on average. There are also additional savings for long-distance drivers, as lorries using AdBlued benefit from a toll on motorway tolls in the European Union.

AdBlue security
AdBlue is safe for both humans and animals. It is non-toxic and non-explosive and non-flammable. At temperatures below -11 ° C, the liquid crystallizes, but this does not affect its further use. When the vehicle starts, the fluid melts again without compromising quality. In case of contact with skin, wash immediately with plenty of water. If swallowed, drink plenty of water and seek medical advice.

READ MORE

READ MORE Reduces the engine friction coefficient by up to 5 times. Increases torque power. Guarantees cold start of the car. Eliminates noise and vibration.
Restores engine power. Reduces fuel consumption by up to 10%. Stabilizes idle speed. Increases the lifespan of mechanisms. Reduces the possibility of engine seizure
when the engine has run out of oil completely.

READ MORE Renergi is the manufacturer of MERGI Combustion Catalyst. MERGI promotes combustion by reducing the ignition delay in the combustion process. Improving this indicator brings various beneficial effects, such as reducing maintenance costs, fuel savings, and reducing emissions.


Renergi AS is a Norwegian company that has been conducting fuel combustion research since the 1970s. As a result, the combustion catalyst MERGI has been developed. This catalyst improves the quality of fuels, releasing more energy, reducing hydrocarbon residues, and producing cleaner residues. It is a non-metallic catalyst.

The MERGI Combustion Catalyst reduces the fuel ignition delay, increasing combustion efficiency. This, in turn, reduces maintenance costs (piston rings break less often and are less likely to seize, reducing wear on rings and cylinder liners, contamination of turbochargers and catalysts, etc.), as well as lowering fuel consumption. It also allows the use of lower-quality fuels and reduces the emission of CO, NOx, and HC. MERGI improves the combustion of heavy fuels, marine diesel, gas oil, gasoline, automotive diesel. It can be used in engines both at sea and on land, as well as in boilers.

Field and laboratory tests have been conducted at the following institutions: Det norske Veritas, Fueltech, Wroclaw University of Technology, Marintek, Delft University of Technology, New Sulzer Diesel. Renergi also has test data from delivery companies. As for quality control, the Swedish National Testing and Research Institute continuously tests the MERGI Combustion Catalyst.

FACTS:

1. Reduces the fuel ignition delay by 8.8% on heavy fuels and 10% on light fuels

2. Reduces exhaust gas temperature by 15°C - 40°C

3. Reduces fuel consumption by up to 10%

4. Reduces CO, HC, and NOx emissions by up to 53%, 40%, and 11%, respectively

Using MERGI Combustion Catalyst

READ MORE Tribotechnical compound is an engine oil additive aimed to restore engine performance parameters: compression, power, acceleration, effective fuel consumption, as well as to extend the engine life span and prevent breakdowns in emergency situations. Compound is designed as diesel engine treatment to be used for passenger cars with a mileage less than 50,000 kilometres and more. Suitable for all engine types and designs, including turbocharged and non-turbocharged ones.
Tribotechnical compound alters friction process of metallic surfaces. It does not react with motor oils and their packages of chemical additives, does not change their properties and characteristics.

READ MORE AdBlue® - 32% urea solution for use in cars
Almost all trucks and heavy equipment have been selected using Selective Catalyic Reduction (SCR) technology to meet the required emission levels (Euro-4, Euro-5, Euro-6).

SCR technologies are based on the addition of AdBlue to the discharge process, causing a chemical reaction that results in harmful substances (NOx) becoming non-harmful - nitrogen and water. The name AdBlue® is a registered trademark of the German Association of Vehicle Manufacturers (Verband der Automobilindustrie / VDA) - scientifically known as AUS-32 test solution. The AdBlue name can only be used if the product meets the requirements of ISO 22241-1 and is VDA approved.

We deliver AdBlue liquid in both 10l and 20l canisters, as well as in larger 210l containers or 1000l IBCs. In addition, we can assemble stationary tank stations in the amount of 5,000, 10,000 and 15,000 lire by separate agreement. AdBlue is already available at petrol stations, which is why it is as easy to buy as regular fuel.

AdBlue quality
There are more and more non-specialized companies in Estonia that try to produce a similar urea solution themselves, which, however, may not meet the quality requirements. By using low-quality products, the car's catalyst can overlap with a layer of lime, which can cost you more than a thousand euros to restore. Using the wrong urea solution is analogous to using dilute AdBlue or even water. However, when driving with an empty AdBlue tank, the catalyst will inevitably become clogged with soot.

Premium Kaubandus OÜ is an AdBlue certified reseller, complying with the ISO 22241-1 standard, and distributes AdBlue, which is certified by VDA. The quality of the product has been checked both in AB Achema's laboratory and in an independent laboratory and has a quality passport. The product is poured into a cleaned canister, which is then sealed. The above measures ensure the highest possible quality of the product.

AdBlue cost
The average cost of AdBlue is 1.5 liters per 100km. Euro-5 compliant cars account for 6% and Euro-6 compliant cars for around 7-8% of total fuel consumption. There are also external factors that affect the consumption of AdBlue: these are the heating quality, the engine performance. At present, all registered lorries have a special diagnostic tool (OBD) that can be used to check the toxicity of exhaust gases. These systems warn drivers that the fuel tank has run out of AdBlue. If the driver continues to drive without the addition of AdBlued, the diagnostic system activates the engine torque limiter, which allows the engine to reach only 60% of maximum torque, and also saves the data without running AdBlued.

Savings when using AdBlue
The use of AdBlue optimizes engine performance, reduces emissions and reduces fuel consumption. The reduction in heating costs amounts to 5% on average. There are also additional savings for long-distance drivers, as lorries using AdBlued benefit from a toll on motorway tolls in the European Union.

AdBlue security
AdBlue is safe for both humans and animals. It is non-toxic and non-explosive and non-flammable. At temperatures below -11 ° C, the liquid crystallizes, but this does not affect its further use. When the vehicle starts, the fluid melts again without compromising quality. In case of contact with skin, wash immediately with plenty of water. If swallowed, drink plenty of water and seek medical advice.

READ MORE • Restores engine power.

• Facilitates cold starting of the engine.

• Extends oil change intervals.

• Extends engine life.

• Reduces engine knock.

• Reduces engine overheating.

• Reduces fuel consumption. Reduces exhaust toxicity.

• Reduces oil consumption.

READ MORE